Boeing Stearman 75 Kaydet project.

This is a very complete project. Many of the items we have multiples of so buyer will get their choice of the best part.

The green fuselage was being restored in the jig when we acquired it. We do not know what all was done on it. It's covered in the good, old Zinc Chromate. Looks ready for parts to start going back on. The red fuselage will need some love. Seems to be covered in primer, but not evenly. The buyer will get choice between these fuselages. We are including a second fuselage, that is damaged but repairable. That fuselage has most of the brackets, control lines, tubes, rudder pedals and etc. still installed. (Buyer gets 2 total fuselages)

The center section pictured has a cracked bracket, so buyer will receive that C.S. and a choice out of the 5 other core center sections we have, to have a complete set of center section hardware. Buyer has choice of fuel tank too. (Buyer gets 2 center sections total, and 1 fuel tank)

We have at least 3 each of verticals, horizontals, and rudders to choose from. 1 vertical was new/rebuilt.

The upper wings are good for patterns. The lowers could be repaired or used as patterns. The hardware was previously removed, however we have a large assortment of New, Restored, and As Removed hardware, that we can get a full set to include with the project.

In the cockpit, we have 1 wood seat that will need rebuilt or to be used for patterns. The corrugated floorboards are there. There are 2 salty throttle quadrants, the bracket they attach to, and elevator trim tab controls. There are 2 fuel selector handles (red ones below mag switch). There are 2 instrument panels. There are no instruments included with the project. If you would like period correct instruments for a restoration, we can provide those separately.

We have a large assortment of the metal skins for the airframe (around 10+ each) , including gear fairings, the skins on either side of the cockpit, boot cowl skins, baggage doors, and the other panels up front. Buyer gets their choice of each. We have only 1 windscreen (it was flattened, damaged) and 1 damaged tailwheel fairing.

We have 1 set of 4 cabanes. There are multiple of the struts that make up the N struts, buyer will get choice of those to make 1 complete set of 2 N struts.

I have 2 firewalls to choose from. 1 looks nice (pictured), other seems to have quite a few patches/doublers.

There is no, engine, engine mount, propeller, or cowling included. If you are interested in an engine, We have some Continental 670s(cores), Lycoming 680s(mix), and a Jacobs 755(take off) available separately.

The project has a data tag & set of logs. I will have to check them to verify what year/ exact model this project is. Quite certain she is a warbird.

Project consists of:

Choice between Red Fuselage & Green Fuselage

Second (repairable) Fuselage which includes most brackets/hardware

Choice of Center Section & Fuel Tank

Choice of Damaged Wings or Spars (Hardware is included)

Choice of Turtle Deck

Choice of Vertical

Choice of Rudder

Choice of Horizontal

Bundle of Flying wires (Unsure how close to complete set is)

1 Set of Hayes Main Rims & Tailwheel

Push/Pull Tubes, Torque Rods, & Related Brackets

Main Landing Gear (not Bendix)

Shaped aluminum boot/fairing for tailwheel

Set of Cabanes

Choice of Firewall

Rudder Pedals

Corrugated Floorboards

2 N struts

2 Instrument Panels

Choice of Baggage door

Choice of MLG fairings

Boot Cowl Panels

1 Damaged Windscreen

2 Throttle Quadrants

Various other Skins & Cockpit items

Project has a data tag & some logs.